SCMI have stock as following table.
BRASS ROUND ROD
Size
Kg/m.
Size
Kg/m.
Size
Kg/m.
3 mm.
0.07
15/32”
1.00
1 1/4"
6.83
5/32”
0.13
12 mm.
...
Brass JIS H3250 C3604
BRASS
Materials Specification:
JIS: H3250 C3604
ASTM : C38000
DIN : CuZn39Pb3
GB : HPb60-2
Typical Chemical Composition (wt%) :
Cu: 57.0~61.0%
Pb: 1.8~3.7%
Fe + Sn: <1.2%
Fe < 0.5%
Typical Mechanical Properties :
Tensile Strength > 335 N/mm2
Vickers Hardness (0.5): 80
Characteristics:
Free Machining Brass is an alloy of copper and zinc. Harder than copper, it is, however, more easily machined and cast.
Bright yellow finish and very corrosion resistant. Easily hard and soft soldered, good heat/electrical conductor.
Application:
Suitable for automatic lathes, CNC lathe processing products, such as hardware, electrical connectors, connector
Profiles Available:
Brass and Bronze
Brass Bar
- Brass Round Bar
- Brass Square Bar
- Brass Hexagon Bar
- Brass Flat Bar
- Brass Sheet
Bronze/Brass Casting
- BC2-3
- ALBC2
Bronze Bushing (BC6)
-
-
SCMI have stock as following table. BRASS SQUARE BAR Wide Thk. Kg/m. 3/16” 3/16” 0.20 1/4" 1/4" 0.35 9/32” 9/32” 0.43 5/16” 5/16” 0.55 ...
-
SCMI have stock as following table. BRASS HEXAGON BAR Size Kg/m. Size Kg/m. 3/16” 0.17 3/4" 2.72 6 mm. 0.27 13/16” 3.30 1/4" 0...
-
SCMI have stock as following table. BRASS FLAT BAR Width Thk. Kg/m. Width Thk. Kg/m. Width Thk. Kg/m. 3/8” 1/8” 0.26 1 1/2" 1/8” 1.10 ...
-
SCMI have stock as following table. BRASS SHEET Size (Oz.) Thk.(mm.) Kg./sheet 14"x48" 3 0.109 0.40 14”x48” 6 0.218 0.80 14”x48&rdq...
-
SCMI have stock Bronze Bushing (BC6C) - OD. Size 1/2" - 8" - OD. Size 1" - 12" ID. Size 1/4"- 10" Meterial: BC6C Bronze Bushing (JIS H5121 CAC406C) Chemical Composit...
-
SCMI have stock Bronze Casting - OD. Size 1/2" - 6" Hight 8"/pc. - OD. Size 7/8" - 5 1/2" ID. Size 1/2"-5" Hight 8"/pc.
-
-
For More Information: Place of our Company Head Office: 1039,1041 Taksin Road Daokanong Thonburi Bangkok 10600 Tel: +66 2-468-6505, +66 2-460-1615, +66 2-877-6722Mobile: +66 97 06...
-
